Nodepills™ are the best solution for anyone trying to quickly and easily build a high quality Oxbow Style Meteor Hammer (PuppyHammer). They feature a simple and easy to use screw-locking system to make node placement and adjustment quick, easy, and accurate.

Made in New Hampshire

Instructions:

1/4”, 6mm or 6.5mm rope is recommended for the tether. Larger sizes will not fit and smaller sizes will not accept the locking-screw properly.

Make sure the end of the tether is melted into a cylinder that is smaller than the inside of the Nodepill to aid in feeding it through. Twist the rope as you push on it to help it slide through the node.

Carefully position the node and double-check that it is in the correct location. Use tape or a sharpie to mark the position if you have difficulty with it moving before locking it in place.

Use a Phillips-type screwdriver to drive the included screw into the node and through the rope. Do not over tighten or the threads will strip.

Tech Specs:

Outer diameter: 3/4” (.77”) / 19.5mm

Inner diameter: 1/4” / 6.5mm

Length: 1” / 25.5mm

Each Nodepill includes a #6 x 1/2” screw (do not over tighten, or the threads will strip)

4 are required to build a “traditional” Oxbow Style Meteor / Puppyhammer.